Philips FW-V220/21 Programming Tracks, Reviewing the programme, Playing the programme, English

CD / VCD / MP3-CD

VCD/CD.

Selecting a desired track during playback

¶Press í or ë (or digit 0-9on the remote control) until the desired track appears on the display.

➜ The selected track number and elapsed playing time appear on the display.

¶If you press í once it will skip to the beginning of the current track and play the track again.

For MP3-CD only

1Press ALBUM -/+(à or á) until the desired Album appears on the display.

2Press TITLE -/+(í or ë) until the desired Title appears on the display.

➜ The selected track number and elapsed playing time appear on the display.

3Press PLAYÉÅ to start playback.

Searching for a particular passage during playback

¶Press à or á to select 4 different search speed.

➜"FRX1" ; "FRX2" ; "FRX3" or "FRX4" is displayed on the TV screen when you select a fast rewind search.

➜"FFX1" ; "FFX2" ; "FFX3" or "FFX4" is displayed on the TV screen when you select a fast forward search.

➜Normal playback will begin at the end of the fast rewinding or forwarding of the selected track.

¶Play returns to normal when PLAYÉÅ is pressed or when a new track is selected.

Programming Tracks

Programming tracks of a loaded disc is possible when playback is stopped.The display will indicate the total tracks stored in the programme. Up to 99 tracks can be stored in the memory in any order. When 99 tracks are stored and you attempt to store another track, the display will show “PROGRAM FULL”.

Note:

–Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks

from such a VCD.

1Load the desired discs in the disc trays.

2Press the VCD (CD 1•2•3) button to select the disc tray.

➜Programming can only be done on the selected disc.

3Press PROGRAM to start programming.

➜The PROG flag starts flashing.

4Pressí or ë (or digit 0-9on the remote control) to select the desired track.

¶For MP3-CD, press ALBUM -/+and TITLE -/+to select the desired Album and Title for

programming.

5Press PROGRAM to store the track.

¶Repeat steps 4 to 5 to store other discs and tracks.

6Press Ç once to end programming.

➜ The total number of tracks programmed and total playing time appear on the display.

Notes:

–For MP3-CD, total playing time will not be shown.

–If the total playing time is more than “99:59” then “--:--” appears on the display instead of the total playing time.

–During programming, if no button is pressed within 20 seconds, the system will exit programme mode automatically.

Reviewing the programme

Reviewing of the programme is possible only when playback is stopped.

¶Pressí or ë repeatedly to review the programmed tracks.

¶Press Ç to exit review mode.

Playing the programme

1Press PLAYÉÅto start programme playback.

➜“PLAY PROGRAM” will be displayed.

➜The track number and elapsed playing time of the current track will appear on the display.

¶If you press REPEAT during programme playback, the current track or all programmed tracks will be played repeatedly.

➜"REPEAT TRACK", "REPEAT PROGRAM" or "REPEAT OFF" will be displayed.

➜The REP and PROG flags appear on the display.

English

		17
pg 01-032/V220/21-Eng	17	3139 115 20823
		28/05/2001, 09:03 AM