Philips FW-V355 Troubleshooting, General, buttons are pressed, quality, The timer is not working

	Troubleshooting
En	GENERAL
	The system does not react when
gli
	buttons are pressed.
sh	Sound cannot be heard or is of poor
	quality.

The left and right sound outputs are reversed.

The remote control does not function properly.

The timer is not working.

The Clock/Timer setting is erased.

The system displays features automatically.

34

pg 001-034/V355/21-Eng 34

–Remove and reconnect the AC power plug and switch on the system again.

–Adjust the volume.

–Disconnect the headphones.

–Check that the speakers are connected correctly.

–Check if the stripped speaker wire is clamped.

–Make sure the MP3 disc was recorded within

32-256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

–Check the speaker connections and location.

–Select the source (VCD 1/2/3 or TUNER, for example) before pressing the function button (É,í,ë).

–Reduce the distance between the remote control and the system.

–Insert the batteries with their polarities (+/– signs) aligned as indicated.

–Replace the batteries.

–Point the remote control directly towards the IR sensor .

–Set the clock correctly.

–Press and hold CLOCK•TIMER to switch on the timer.

–If recording or tape dubbing is in progress, stop recording.

–Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.

–Press and hold Çon the system to switch off the demonstration.

4/17/02, 1:15 PM 3139 115 21372