Philips FW-V355 Tape Operation / Recording, One touch recording / Recording, To stop recording

Tape Operation / Recording

	Rewinding / Fast forwarding		Preparation for recording
1 Stop playback, press à or á.		1 Press TAPE to select TAPE 2.
	➜ The tape will stop automatically at the end of	2 Load a recordable tape into tape deck 2 with full
	rewinding or fast forwarding.		spool to the left.
2 Press Ç to stop rewinding or fast forwarding.
		3 Prepare the source to be recorded.
	Note:		VCD – load the disc(s).
			TUNER – tune to the desired radio station.
	– During rewinding or fast forwarding of a tape, it
			TAPE – load the prerecorded tape into tape
	is also possible to select another source (VCD or
			deck 1 with the full spool to the left.
	TUNER, for example).
			AUX – connect external equipment.
			When recording is in progress
	General information on
	recording	➜ REC starts flashing.
		● It is not possible to listen to another source,
● If you do not intend to record via the
			except tape dubbing.
	microphone, unplug the microphone to avoid
		● It is not possible to activate the timer function
	accidental mixing with other recording source.
			during recording or tape dubbing.
● For recording, use only tape of IEC type I
	(normal tape).

● The recording level is set automatically,		One touch recording / Recording
	regardless of the position of the Volume, DBB,	the mixed sound
	DSC and so forth.	1 Press VCD 1/2/3, TUNER or AUX to select
● The tape is secured at both ends with leader
		the source.
	tape. At the beginning and end
		● You can connect a microphone to record the
	of the tape, nothing will be
	recorded for six to seven	mixed sound (refer to “Karaoke - Microphone
	seconds.	Mixing”).
● To prevent accidental recording,		2 Start playback of the selected source.
	break out the tab on the left	3 Press RECORD to start recording.
	shoulder of the tape side you
	want to protect.	To stop recording
●	If “CHECK TAPE” is displayed, the protection
		● Press Ç on the system.
	tab has been broken. Put a piece of clear
	adhesive tape over the opening.	Note:
		– One Touch Recording is not possible in TAPE
		mode, "SELECT SOURCE" will be displayed.
		CD Synchronised start recording
		1 Press VCD 1/2/3 to select the disc.

E n g l i s h

IMPORTANT!

–Recording is permissible if copyright or other rights of third parties are not infringed upon.

–Recording is possible only on tape deck 2.

●Press í or ë to select the desired track to start recording.

●You can programme the tracks in the order you want them to be recorded (refer to “CD/VCD/ MP3-CD Operations - Programming the disc tracks”).

2Press RECORD to start recording.

➜ The disc will start playback automatically.

27

pg 001-034/V355/21-Eng 27 4/17/02, 1:15 PM 3139 115 21372