Philips FW798W DCenter Speaker Connection, IDigital Out Connection, Inserting batteries into the

DCenter Speaker

Connection

Connect the black (non-marked) wires to the black CENTER terminal and the blue (marked wires) to the blue CENTER terminal.

GSubwoofer Out Connection

Connect the optional active subwoofer to the SUBWOOFER OUT terminal. The subwoofer reproduces just the low bass effect (e.g. explosions, the rumble of spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer.

IDigital Out Connection

You can record the digital sound from the CD, through this output, on any audio equipment with digital input (e.g. CD Recorder, Digital Audio Tape (DAT) deck, Digital to Analog Converter and Digital Signal Processor).

PREPARATION

Inserting batteries into the	English
Remote Control

•Insert the batteries (Type R06 or AA) into the remote control as shown in the battery compartment.

EWireless Surround Out

Connection

Connect transmitter unit of the wireless rear speakers to the SURROUND OUT terminal. See section on 'Setting up FB219W'.

Note:

–Availability of wireless transmitter and its peripherals are subjected to the approval of local authorities. Please check with respective local safety or approving authority.

FRear Speakers’ Connection

If you are not using the supplied wireless surround speakers, you can used your own wired surround speakers. Connect the black (non-marked) wires to the black REAR SURROUND terminals and the white (marked wires) to the grey REAR SURROUND terminals.

HLine Out Connection (wireless

ready)

You can connect the audio left and right LINE OUT terminals to a optional CD Recorder ANALOGUE IN terminals. This allows you to record in an analogue format.

You can also install additional optional front active speakers away from the system (e.g. in another room) to reduce the inconvenience of running long speaker wires across rooms. You can place as many remote speakers as you like provided they operate at the same radio frequency. Connect the wireless radio frequency transmitter to the LINE OUT terminals. Place the active speakers at your preferred location. Be sure to follow the instructions supplied with the active speakers.

Connect one end of the cinch cable (not supplied) to the DIGITAL OUT socket and the other end to the audio equipment with digital input.When connecting the cinch cable, make sure it is fully inserted.

JConnecting other

equipment to your system

You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc player, DVD player or CD-Recorder to the AUX/CDR IN terminals at the rear of the system.

KAC Power Supply

After all other connections have been made, connect the AC power cord to the system and to the wall outlet.

- + - +

•To avoid damage from possible battery leakage, remove dead batteries or batteries that will not be used for a long time. For replacement, use type R06 or AA batteries.

11