Philips FW798W Easy Set, Switching the system ON, Switching the system to standby mode, Notes

Models: FW798W

1 33
Download 33 pages 41.59 Kb
Page 19
Image 19
Easy Set

Easy Set

EASY SET allows you to store all available radio stations automatically.

1Press and hold STANDBY ON (on the system only) for five seconds; when the system is in standby or demonstration mode.

ªEASY SET” will be displayed, and followed by “TUNER” and then “AUTO”.

ªEASY SET will start searching for all radio on FM band and then followed by radio stations on AM band.

ªAll available radio stations with sufficient signal strength will be stored. Up to 40 presets may be stored.

Notes:

EASY SET will start with the FM band, if there are still presets available, the system will continue to store the AM band.

When EASY SET is used, all previously stored radio stations will be replaced.

The last preset radio station will appear on the display when EASY SET is completed.

Switching the system ON

Press STANDBY ON (on the system only), CD, TUNER, TAPE or AUX.

You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons.

Switching the system to standby mode

Press STANDBY ON again or Bon the remote control.

ªThe system will switch to standby mode.

Selecting the Source

Press the respective source selection button: CD, TUNER, TAPE or AUX.

ªThe display indicates the selected source.

Note:

For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/ CDR IN terminals.

Selecting the Equalizer

Display

You can select the desired equalizer display for the system. You must not press the DSC or INCREDIBLE SURROUND buttons on the system before using the JOG.

Rotate the JOG to select the desired Equalizer Display, NORMAL, TOP DOWN, or NITE MODE.

ª The selected display will be shown:

NORMAL Display

PROGRAM SHUFFLE

 

STEREO

REPEAT TIMER REC

 

BACK

NEWS T.A. AM MW FMLW

 

FRONT HSD

60Hz 250Hz 500Hz

1KHz

2KHz 4KHz 8KHz

TOP DOWN Display

PROGRAM SHUFFLE

 

STEREO

REPEAT TIMER REC

 

BACK

NEWS T.A. AM MW FMLW

 

FRONT HSD

60Hz 250Hz 500Hz

1KHz

2KHz 4KHz 8KHz

NITE MODE Display

PROGRAM SHUFFLE

 

STEREO

REPEAT TIMER REC

 

BACK

NEWS T.A. AM MW FMLW

 

FRONT HSD

60Hz 250Hz 500Hz

1KHz

2KHz 4KHz 8KHz

Note:

In NITE MODE, all lights will be switched off and the display brightness will be dimmed.

OPERATING THE SYSTEM

Sound Control

English

VOLUME ADJUSTMENT

Adjust VOLUME to increase or decrease

 

the sound level.

 

For Personal Listening

 

Connect the headphones plug to the n

 

socket at the front of the system. The

 

speakers will be muted.

 

INCREDIBLE SURROUND

Normal stereo sound is determined by the distance between the front speakers. When Incredible Surround is switched on, it magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect. There are 12 different Incredible Surround levels available for selection.

Press INCREDIBLE SURROUND to switch on.

ª The INCREDIBLE SURROUND display lights

up.

ªIS XX” will be displayed.

Note:

"XX" is the last selected Incredible Surround level.

19

Page 19
Image 19
Philips FW798W manual Easy Set, Switching the system ON, Switching the system to standby mode, Selecting the Source, Notes