Philips FWD796/21 manual DVD Menu Operations, Setting the screen saver, English, PCM only, PCM 96K

DVD Menu Operations

Setting the screen saver Setting the PCM output

PBC PBC

English

If set to ON, the screen saver will be activated when you leave the system in stop or pause mode for 3 minutes.The default setting is ON.

Setting the digital output

Set Digital Output according to your optional audio equipment connections.

PBC

Off

Select this to deactivate the digital output.

All

Select this if you have connected the digital output to a piece of optional audio equipment that has a multichannel decoder.

PCM only

Select this if the external component is capable of processing digital signal input. After that, proceed to “Setting the PCM output”.

PCM 96K

Select this if the optional audio equipment is capable of processing digital signal input with sampling rate of 96 kHz. However, if the sound output is distorted or there is no sound, select ‘48 kHz’.

PCM 48K

Select this if the optional audio equipment is incapable of processing 96 kHz digital signal input, then convert to standard signal with sampling rate of 48 kHz.

Note:

–The PCM OUTPUT can be selected only when PCM ONLY is selected.

Night mode - turning on/off

PBC

NIGHT MODE SET TO OFF

Off

Select this when you want to enjoy the surround sound with its full dynamic range.

On

Select this to level out the volume. High volume output will be softened and low volume output will be brought upward to an audible level.This feature is only available for movies with Dolby Digital mode.

33