Philips FWD796/21 manual Clock/Timer Operations, Viewing the clock, Setting the timer, English

Clock/Timer Operations

English

Viewing the clock

The clock (if it is set) will be shown in Standby mode. Press CLOCK on the system to view clock in any source mode (or press CLOCK/ TIMER on the remote control).

●Press DISPLAY on the system to select 12- hour or 24-hour mode.

➜ If the clock has not been set, “--:--“ will blink until you set the clock.

Setting the clock - see page 19.

Setting the timer

The system can switch to DISC,TUNER, TAPE mode automatically at a preset time, serving as an alarm to wake you up.

IMPORTANT !

–Before setting the timer, ensure that the clock is set correctly.

–The timer will always be switched on once set.

–The timer will not start if a recording is in progress.

–The volume of the timer will increase gradually from the minimum level to the last tuned volume level.

–The time can be set in 24-hour mode.

1 Press and hold TIMER or CLOCK/TIMER for

more than 3 seconds,

➜ TIMER will start to flash.

➜ The selected source will be displayed.

2Press DISC,TUNER or TAPE (1/2) to select timer mode.The corresponding source will appear on the display.

DISC - load the disc.

TUNER - Tune to the desired radio station. TAPE 1 - Load the prerecorded tape into tape deck 1.

3Press O or P on the system or remote control to set hours .

4Press 1 or ¡ on the system or remote control to set the minutes.

5Press TIMER or CLOCK/TIMER to store the setting.

➜“TIMER ON” will be displayed for 3 seconds.

➜The timer will start to work.

➜The timer will always be switched on once it has been set.

41