Philips FWD796/21 Connections, English, Using S-VideoIn jack, Using an accessory RF modulator

Connections

English

Using S-Video In jack

●Use the S-Video cable (not supplied) to connect the system’s S-VIDEO OUT jack to the S- Video input jack (or labeled as Y/C or S-VHS) on the TV set.

●To listen to TV channels through this system, use the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV set.

IMPORTANT!

–If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

Using an accessory RF modulator

●Use the composite cable (yellow) to connect the system’s VIDEO jack to the video input jack on the RF modulator.

●Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.

12