During processing:
•Do not use this appliance on an unstable or uneven surface.
•Keep the appliance and its power cord out of the reach of children.
•Never let the appliance run unattended.
•Do not touch the steam or the metal parts of the appliance, to avoid burns or scalding.
•Do not disconnect the power cord or remove the head unit before processing is complete.
•If you have to stop processing, disconnect the power cord before you perform other operations.
•If there is a power outage during processing and this lasts up to three minutes, do not immediately restart the soymilk maker. Empty the contents in the soymilk maker, and then put in new contents before restarting. Otherwise, the contents will stick to the chamber or over ow, or the appliance will set off a long alarm.
After processing:
•Disconnect the power before you continue other operations.
•Disconnect the power and remove the power cord before cleaning or disassembling this appliance.
•To prevent steam scalding, keep a certain distance from the soymilk maker before you lift the head unit.
•Install, remove, and clean the perforated ow cup with care. The blade on the head unit is sharp. Be careful not to cut yourself or others.
•To prevent a short circuit or an electric shock,
•do not use water to rinse the outside of the chamber unit or head unit (including the head unit handle, control panel, upper plug, upper plug connector, and the power cord connector) and keep them away from drip or splash;
•do not place the head unit in water; and
•do not place the base of the soymilk maker in water.
•Use a microwave to heat up cold soymilk. Do not use this appliance to heat it, as the contents will stick to the inner side of the chamber.
EN 5
