| English 17 |
Problem | Solution |
|
|
The Hr:Min light does | You have selected the Hot pot cooking mode.You can only adjust the |
not go on when I set the | cooking time in the Quick start (manual) mode and in the preset Stew, |
cooking time. | Soup/Congee, |
| modes. |
| The light is defective.Take the appliance to your Philips dealer or a service |
| centre authorised by Philips. |
The timer light does not go | You have selected the Quick start (manual) mode or the preset Hot pot, |
on when I set the timer. | Stir fry, Boil or Keep warm cooking mode.You can only use the timer in |
| the Stew, Soup/Congee, |
| the ‘Default and adjustable settings’ table in chapter ‘Using the appliance’). |
| The light is defective.Take the appliance to your Philips dealer or a service |
| centre authorised by Philips. |
I cannot change the power | In the Stew and Soup/Congee modes, the appliance first brings the food |
setting before I select the | to the boil and then switches to a lower power level.You can only adjust |
Stew mode or Soup/ | the power level after the boiling stage. |
Congee mode. |
|
The appliance beeps | You have put unsuitable cookware on the cooking plate or you |
continuously. | have removed the cookware from the cooking plate during cooking. |
| Place suitable cookware on the cooking plate. |
The maximum power setting for certain cooking modes is very low.
I cannot switch to a different cooking mode during cooking.
The fan works but the appliance has not started cooking.
In the Stew and Soup/Congee modes, the appliance first brings the food to the boil and then switches to a lower power level.You can only adjust the power level after the boiling stage.
You cannot switch to a different cooking mode during cooking. If you want to select a different cooking mode, press the Power on/off button to switch off the cooker.Then press the Power on/off button again to switch the cooker back on.
You have to press the Start button within 1 minute after you press the Power on/off button.If you do not press the Start button within 1 minute, the induction cooker switches off and the fan continues to work for 1 minute to cool down the appliance.
Codes on the | Message | What you should do |
display |
|
|
The display freezes | There is no cookware on |
and shows a | the cooking plate or the |
flashing ‘!’ | cookware is not suitable |
| for the induction cooker. |
E1 | Unstable voltage in |
| power supply network |
E2 | The cooking plate has |
| overheated. |
Place suitable cookware on the cooking plate.
Check if the voltage in your home is suitable for the induction cooker.
Switch off the appliance and unplug it. Let it cool down for approx. 10 minutes and then switch on the appliance again.
