English
Display
1Power (W)/temperature (°C) symbol
2Power level
3Error symbol
4Cooking time
5Timer indicator
6Preset cooking mode symbols
7Cooking time/power level/cooking temperature indication
Important
Read this user manual carefully before you use the appliance and save it for future reference.
Danger
-Never immerse the appliance in water or rinse it under the tap.
Warning
-Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
-Only connect the appliance to an earthed wall socket. Always make sure the plug is inserted firmly into the socket.
-Do not use the appliance if the plug, the mains cord or the appliance itself is damaged.
-If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
-This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
-Keep the mains cord out of the reach of children. Do not let the mains cord hang over the edge of the table or worktop on which the appliance stands.
-Make sure the cooking plate is clean and dry before you switch on the appliance.
-Do not cover the air vent while the induction cooker is operating.
-Do not plug in the appliance or operate the control panel with wet hands.
-Do not touch the cooking plate after cooking, as it retains heat from the cookware.
-Metallic objects such as knives, forks, spoons and lids should not be placed on the cooking plate since they can get hot.
-Do not cover any part of the cooking plate with aluminium to prevent the risk of electric shock, short circuiting or fire.
-If the surface of the cooking plate is cracked, switch off the appliance and do not use it anymore to prevent the risk of electric shock, short circuiting or fire.
