6
C
C
3Lift the basket handle to raise the wire basket to its highest position, let fat drip into pot and then remove the wire basket from the fryer.
4Pour out the oil or fat from the back left corner pour spout on inner pot into a suitable storage container if you plan on reusing it or to discard. Clean the housing and the inner pot with a moist cloth with
C |
5Clean the lid, condensation collector and the wire basket in hot soapy water or in the dishwasher.
Do not use any abrasive cleaning agents or materials (e.g scouring pads) to clean the appliance as to prevent damaging the
6Rinse the parts with clean water afterwards and dry them thoroughly.
7To clean the permanent
•Undo the screws on the inside of the lid.
•Remove the filter and clean it in hot soapy water. Let the filter dry thoroughly before you put it back into the lid and before you start using the appliance again.
Storing the Appliance
1Put all parts back onto/into the fryer and close the lid.
C 2 Wind up the cord, push it back into the storage compartment and put the plug in the plug clip.
3Lift the fryer by its grips.