Philips HP1500 manual Functional overview Product illustrations on inside flap, English

0912HP_EU 09-12-2003 12:12 Pagina 12

12ENGLISH

Functional overview -

Product illustrations on inside flap

Base station front panel (figure 1)

1Power section

a) power on/standby and demo mode button

By holding the 'STANDBY-ON' button for 1.5 seconds or longer, the demo mode can be activated:

–Pink noise is used to simulate the position of the 5 virtual speakers in the headphone.

–The corresponding speaker indicator in the output section of the display will go on indicating which speaker is being

simulated.

The demo mode can be deactivated by pressing any control button on the base station.

b)STANDBY-ON’ dual-color LED

–Red = base station in standby mode

–Green = base station in active mode

2Source select section

a)button to toggle between the analogue and digital coaxial inputs

b)‘Source’ menu yellow LED

c)‘ANALOG’ indication green LED

d)‘DIGITAL’ indication illuminated by dual colour LED:

–Red = input signal is locked, but invalid

(for instance 96 kHz) or unlocked (no signal)

–Green = input signal is locked and valid (signal accepted)

3The input signal detection section

a)‘STEREO’ indicator green LED (activated in case of detection of digital stereo signal or selection of analogue input source)

b)‘DTS’ indicator green LED

(activated in case of detection of DTS signal)

c)‘MULTICHANNEL’ indicator green LED

(activated in case of detection of multi-channel audio)

d)‘DOLBY DIGITAL’ indicator green LED

(activated in case of detection of Dolby Digital signal)