Philips HP1500 manual OPTION 2 DIGITAL STEREO OR MULTI CHANNEL SOURCE, Base station, English

0912HP_EU 09-12-2003 12:12 Pagina 19

ENGLISH 19

OPTION 2: DIGITAL STEREO OR MULTI

CHANNEL SOURCE:

Connecting the digital base station to a digital stereo source (CD player with S/PDIF output, etc.) or a digital multichannel source (DVD player with S/PDIF output, etc.)

Base station

1 Connect one side of the S/PDIF digital audio cable (included) to the S/PDIF output of the audio source and the other side to the S/PDIF input of the base station.

2 Next take the S/PDIF cable that most likely came supplied with your digital audio source. Connect one side of this 2nd S/PDIF digital audio cable (not included) to the S/PDIF input of your amplifier or home cinema receiver and the other side to the S/PDIF output of the base station.

When connecting your audio equipment in this way, you will be able to benefit from the Automatic Audio Signal Routing (AASR) feature. As long as the base station is powered – even in stand-by mode – the audio signal from the audio source will be made available not only to the digital base station but it will be routed through to the rest of your home entertainment set-up. Without the need for swapping cables you can decide whether you wish to enjoy the audio through your headphones or through for example the speakers of your home entertainment system.

3 Check if the red RCA plug (right channel) is connected to the right channel (red) of the audio source.

4 Power on your audio source: switch on your audio source, i.e. DVD player with S/PDIF output, CD player with S/PDIF output, etc.