0912HP_EU
20ENGLISH
IMPORTANT!
•In case of connecting an audio CD player to the HP1500 base station making use of the CD player’s digital outputs: do not up sample the Audio CD digital output signal higher than 44.1 kHz.
•When connecting a DVD player to the HP1500 base station: do not up sample the DVD digital output signal higher than 48 kHz.
5 Power on the base station: switch on the digital base station.
The power indication LED of the base station will change from red to green.
6 Source select: select the digital input on the base station by pressing the ‘Source’ button.
The digital indicator will light up in GREEN. In case of an invalid digital signal (for example a digital MP3 data stream) the digital indicator will be RED blinking.
The device will recognize the following digital input signals:
–Stereo LPCM with sample frequencies 44.1 kHz and 48kHz
–Dolby® Digital
–DTS®, up to 5.1 channels
7 Input signal detection: after the input signal has been analyzed, its nature will automatically be indicated on the display of the base station.
– Stereo: will light up in case of a digital stereo signal
(for example when playing a CD in a CD/DVD player, or when playing a VCD in a DVD player)
–Multichannel: will light up in case of a digital multichannel signal (for example when playing a DVD in a DVD player. The following multichannel streams can be decoded:
–DTS: the DTS indicator will light up in GREEN.
–Dolby Digital: the Dolby Digital indicator will light up in GREEN
