Philips HP1500 manual Basic operation, When the base station is connected to a

0912HP_EU 09-12-2003 12:12 Pagina 26

26ENGLISH

Basic operation

When the base station is connected to a:

-analogue line output of an analogue stereo source (stereo TV, stereo VCR, (S)VCD player, tape recorder, etc.)

-digital electrical coaxial S/PDIF output of a stereo source (CD player with S/PDIF output, etc.) or a multichannel source (DVD player with S/PDIF output, etc.)

1 Switch on your audio source.

2 Switch on the HP1500 base station: the power indicator will change from red to green.

3 Select the input source you wish to listen to (analogue or digital):

–In case of analogue input source: you can select Dolby Prologic II; activation of Dolby Headphone is optional.

–In case of digital input source: Dolby Digital or DTS will be activated automatically, together with Dolby Headphone.

4 In case you activate Dolby Headphone you can toggle between the 3 modes and bypass mode.

5 In case you want to listen to a corded headphone:

–You can connect up to 2 corded headphones to the base station.

–Adjust the volume on the base station: this will have no effect on the headphone.

–Adjust the bass as desired by pressing the DBE button on the base station: this will have no effect on the headphone.