8English
Electromagnetic fields (EMF)
These Philips appliances comply with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliances are safe to use based on scientific evidence available today.
Charging
Charging the epilator
Charging the epilator takes approximately 1 hour.When the epilator is fully charged, it has a cordless operating time of up to 40 minutes.
1Switch off the appliance before you charge it.
2Insert the appliance plug into the inlet socket and put the adapter in the wall socket (Fig. 5). ,, The charging light pulsates white to indicate that the epilator is charging (Fig. 6).
,, When the battery is fully charged, the charging light lights up white continuously for 20 minutes and then goes out (Fig. 7).
Battery-low indication
1When the batteries are almost empty, the charging light starts to flash red.
When the charging light starts to flash red, the batteries still contain enough energy for a few minutes of operation.
2When the batteries are completely empty, the charging light lights up red continuously.
To charge the epilator, follow steps 1 and 2 in section ‘Charging the epilator’ above.You can also run the appliance directly from the mains by inserting the appliance plug in the socket of the appliance and the adapter in a wall socket.
Epilation tips
Before you start epilating
Note: Always clean the epilating head before first use.