Turn on
1 Press 
.
»The unit switches to the last selected source.
To switch to standby mode: 1 Press 
.
»The clock (if set) is displayed. To switch to Eco Power Standby mode:
1Press 
for over 3 seconds.
»The backlight on the display panel turns off.
»The blue Eco Power indicator lights up.
Set clock
1 In the standby mode, press and hold CLOCK to enter the clock setting mode.
»Clock is displayed and the hour digits begin to blink.
2 Press + VOL - to set the hour.
3 Press CLOCK to confirm
»The minute digits begin to blink.
4 Press + VOL - to set the minute.
5 Press CLOCK to confirm the clock setting.
Enable Easylink
EasyLink uses the HDMI CEC (Consumer Electronics Control) industry standard protocol to share functionality with all HDMI CEC compliant devices over HDMI. It enables the connected devices to control each other with a single remote control.
Note
•EasyLink (HDMI CEC) is only applicable with certain criteria. Terms and conditions may vary by product. Consult your product dealer for information.
•Philips does not guarantee 100% interoperability with all HDMI CEC devices.
1Press SETUP for over 3 seconds.
»‘Easylink On’ is displayed.
»To disable Easylink, press and hold SETUP until ‘Easylink Off’ is displayed.
5 Play
| E n g l i s h |
Play from USB |
Note
•Ensure that the USB device contains playable music. (see ‘USB playability information’ on page 16)
1 Flip open the cover on the front panel.
2 Insert the USB plug of a USB device into the 
jack.
3 Press USB to select the USB source.
»The total number of tracks is displayed.
4 Press ALB/PRESET/
to select a folder. 5 Press 
/
to select a file.
6 Press 
to start play.
• During play, press and hold 
or 
to search fast backward or forward.
• Press 
to pause or resume play.
Repeat play
1 During play, press REPEAT repeatedly to select:
»[REPEAT] (repeat): play the current track repeatedly.
»[REPEAT ALL] (repeat all): play all tracks repeatedly.
2 To return to normal play, press REPEAT until the selected function is no longer displayed.
EN 13
