3 Press the buttons on the MP3 player to select and play audio files or music.
•On the MP3 player, it is recommended to set the volume in the range of 80% maximum volume.
Play music via Bluetooth
Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers.
What you need
•A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth version as 2.1 + EDR.
•The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).
1 Press Bluetooth on the remote control to switch the SoundBar to Bluetooth mode.
»»The Bluetooth indicator blinks.
2 On the Bluetooth device, switch on Bluetooth, search for and select Philips HTL9100 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth).
»»During connection, the Bluetooth indicator blinks.
3 Wait until you hear a beep sound from the SoundBar.
»»The Bluetooth indicator lights up.
»»If the connection fails, the Bluetooth indicator blinks continually.
4 Select and play audio files or music on your Bluetooth device.
•During play, if a call is coming, music play is paused. Play resumes when the call ends.
•If music streaming is interrupted, place the Bluetooth device closer to the Soundbar.
5 To exit Bluetooth, select other source. |
|
• When your switch back to Bluetooth | li s h |
mode, Bluetooth connection remains | |
active. | E n g |
Note
•• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.
•• If you want to connect your SoundBar with another Bluetooth device, disable the currently connected Bluetooth device.
Auto standby
When playing media from a connected device, the SoundBar automatically switches to standby if:
•no button is pressed for 15 minutes, and
•no audio/video playback is detected from a connected device.
Apply factory settings
You can reset your SoundBar to the default settings programmed at the factory.
1
EN 13