Philips HTL9100 user manual Your SoundBar, Indicators on the main unit

2 Your SoundBar

Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome.

Indicators on the main unit

This section describes the information of the LED indicators on the main unit.

a

b c d e f g h i j

AVolume indicator

• When you change volume, one

or multiple indicators (up to eight indicators) light up to indicate the volume level.

Wireless pairing indicators

•During wireless pairing between the main unit and the surround speakers, eight indicators blink one by one.

•When the pairing succeeds, eight indicators light up for three seconds.

•If the pairing fails, eight indicators blink three times.

BHDMI ARC

•Lights up when you select HDMI ARC as the input source.

•Blinks when no audio from the selected HDMI ARC source is detected, or when an unsupported audio format is detected.

4EN

CHDMI 1

Lights up when you select HDMI IN 1 as the input source.

DHDMI 2

Lights up when you select HDMI IN 2 as the input source.

EOPTICAL/COAX

•Lights up when you switch to optical or coaxial input source.

•Blinks when an unsupported audio format is detected.

FAUX

Lights up when you switch to AUX input source.

GAUDIO-IN

Lights up when you switch to AUDIO-IN source (3.5mm jack).

HBluetooth

•Lights up when you switch to Bluetooth mode and Bluetooth devices are paired.

•Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired.

IV. SURR indicator

•Lights up when surround mode is selected.

•Off when stereo mode is selected.

•Blinks once when night mode/auto volume is enabled.

•Blinks twice when Dolby Digital audio is input.

•Blinks twice when night mode/auto volume is disabled.

•Blinks three times when DTS audio is input.

J (Standby-On/Standby indicator) When the SoundBar is in standby, the standby indicator turns red.