Note
•• It may take around 2 hours to fully charge the speakers.
•• If the charging lasts more than 4 hours during standby of the main unit, the speakers automatically switch to standby.
Pair up with speakers/ subwoofer
The wireless speakers and subwoofer automatically pair up with the SoundBar for wireless connection when you turn on the SoundBar, the speakers and the subwoofer. If no audio from the wireless speakers and subwoofer can be heard, manually pair up the speakers and the subwoofer.
Pair up with the speakers
1 Turn on the SoundBar and the surround speaker.
»»If the connection to the SoundBar is lost, the indicator on the speaker blinks red slowly.
2 Press the Connection key on the speaker
with a pin to enter the pairing mode.
»»The indicator on the speaker blinks red quickly.
3 On the remote control, press AUX, and then press TREBLE
»»If the pairing succeeds, the indicator on the speaker lights up white (undocked from the main unit), or the indicator on the speaker lights up white for
30 seconds (being docked into the main unit).
»»If the pairing fails, the indicator on the speaker blinks red slowly.
4 If the pairing fails, repeat the steps above.
5 Repeat the steps above to pair up the other surround speaker with the main unit.
Pair up with the subwoofer
1 Turn on the SoundBar and the subwoofer.
»»If the connection to the SoundBar is lost, the indicator on the subwoofer blinks white slowly.
2 Press the CONNECT button on the subwoofer to enter the pairing mode.
»»The indicator on the subwoofer blinks white quickly.
3 On the remote control, press AUX, and then press TREBLE
»»If the pairing succeeds, the indicator on the subwoofer lights up white.
»»If the pairing fails, the indicator on the subwoofer blinks white slowly.
4 If the pairing fails, repeat the steps above.
Place speakers
For best sound effect, position all the speakers towards the seating position and place them close to your ear level (seated).
SUB |
|
WOOFER |
|
REAR L | REAR R |
8EN
