Philips HTL9100 user manual Wall mount, Amplifier, Audio, Bluetooth, Main unit

5Wall mount your SoundBar

Before you mount your SoundBar on the wall, read all safety precautions. (see 'Safety' on page 2)

Wall mount

Note

•• You must detach the surround speakers from the main unit before wall mounting or un-mounting.

•• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country.

•• Secure the wall mount to a wall that can support the combined weight of the product and the wall mount.

•• Before wall mount, you need not remove the four rubber feet at the bottom of the soundbar, otherwise the rubber feet cannot be fixed back.

Screw length/diameter

Depend on the type of wall mounting this wall mount bracket, make sure that you use screws of a suitable length and diameter.

3 - 3.5mm

> 25mm

For information about how to wall your SoundBar, see the wall mount guide.

6Product specifications

Note

•• Specifications and design are subject to change without notice.

Amplifier

•Total output power:

210W RMS (+/- 0.5 dB, 30% THD) /

168W RMS (+/- 0.5 dB, 10% THD)

•Frequency response: 20 Hz-20 kHz / ±3 dB

•Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted)

•Input sensitivity:

•AUX: 400 mV

•AUDIO-IN: 220 mV

Audio

•S/PDIF Digital audio input:

•Coaxial: IEC 60958-3

•Optical:TOSLINK

Bluetooth

•• Bluetooth profiles: A2DP

•• Bluetooth version: 2.1 + EDR

Main unit

•• Power supply: 110-240 V~, 50/60 Hz

•• Power consumption: 50 W

•• Standby power consumption: ≤ 0.5 W

•Speaker impedance:

•Woofer: 8 ohm

•tweeter: 8 ohm

•Speaker drivers: 2 x 63.5 mm (2.5") woofer + 2 x 25.4 mm (1") tweeter

•• Dimensions (WxHxD):

1035 x 73 x 156 mm (with 2 surround speakers attached)

•• Weight: 3.9 kg

14EN