Wireless subwoofer
The SoundBar comes with a wireless subwoofer.
ACONNECT
Press to to enter the pairing mode for the subwoofer.
BSubwoofer indicator
•When the power is turned on, the indicator lights up.
•During wireless pairing between the subwoofer and the main unit, the indicator blinks white quickly.
•When the pairing succeeds, the indicator lights up white.
•When the pairing fails, the indicator blinks white slowly.
CAC MAINS~
Connect to the power supply.
3 Connect and set
up | E n g l i s h |
This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide.
Note
•• For identification and supply ratings, see the type plate at the back or bottom of the product.
•• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
Charge speakers
If the wireless surround speaker is undocked from the main unit, its battery level is indicated by the indicator on the speaker.
•Light up white: full battery
•Light up red: low battery level (less than 30% remaining)
•Flash red: near empty (less than 10% remaining)
1 Dock your speakers onto the main unit to charge the speakers.
2 Turn on the main unit.
»»During charging, the indicator on the speaker lights up amber.
»»When fully charged, the indicator on the speaker lights up white for 30 seconds.
EN 7
