XDVDN8190 OPERATION
Band
AS/PS (Auto Store/Preset Scan)
Secondary LCD
Display
Open Monitor
Eject
Rotary Encoder/Enter
Reset
SD Card Slot
Microphone
Play/Pause/Scan
Channel/Chapter/Track Up Fast Forward
Channel/Chapter/Track Down Fast Reverse
Control Functions - Monitor Closed
Press BAND to increment from FM1, FM2, FM3, AM ] FM1.
Press AS/PS momentarily to start station PRESET SCAN function,
Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.
Additional LCD for system information while monitor is closed.
When the monitor is closed, press DISP to toggle display between information available for the current mode, including clock, frequency and track information.
When the monitor is open, press DISP to toggle display between the current mode and the navigation map. The navigation SD card must be inserted to use this feature.
Red = Disc inserted, Blue = No disc.
Press OPEN to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.
Press
once to eject disc.
Rotate
To resolve abnormal operation or if the unit is inoperable, press the RESET button located on the front
Note: Use the tip of a pen to access the reset button. To restore the factory default settings, refer to page 19.
Insert SD card to access Navigation software, MP3, WMA or JPEG files. The card will click into place when properly inserted. To remove card, press in on the card, then release to eject.
Use microphone for Bluetooth operation.
In tuner mode, press SCAN to scan all strong stations in the current band.
In disc mode, press once for PAUSE, and "PAUSE" will appear in the display. Press again to resume PLAY.
Press to select the next channel/chapter/track for playback. Press and hold to manual tune up or fast forward.
Press to select the previous channel/chapter/track for playback. Press and hold to manual tune down or fast reverse.
10
