XDVDN8190 OPERATION
General Operation
Power On/Off
Mute
Mode
Optional Mode Selection
Volume
Audio Adjustment (from front panel)
Press PWR to turn the unit on. Hold for 3 seconds to turn the unit off.
Press MUTE to silence the audio;
will appear in the OSD (On Screen Display). Press MUTE again to cancel.
Press MODE to select between Tuner, Disc, iPod, Bluetooth, Camera, SD, Navigation and Auxiliary inputs. Modes of operation are indicated in the OSD (On Screen Display). iPod, and SD card (optional) must be connected/inserted to appear in the MODE selection string.
Press the top left corner of the screen to display the OSD menu bar. Press Tuner, Disc, iPod, Bluetooth, Camera, SD, Navigation or Auxiliary in the MAIN menu page to select the desired source.
Adjust VOLUME using rotary encoder or the VOL +/- buttons
Press volume knob momentarily to enter the Audio Adjustment menu. Press volume knob momentarily to advance to desired parameter to be changed. Turn volume knob Q or P to adjust to desired level. Press volume knob to advance to next selection or press and hold to exit.
RF
LR
L
ltem | A djustable Range |
Master Volume | 00 to 40 |
Front Left Channel Volume | |
Front Right Channel Volume | |
Rear Left Channel Volume | |
Rear Right Channel Volume | |
Center Channel Volume | |
Subwoofer Volume |
Note:
Audio Adjustment (from remote)
Press the SEL button. Press the p or q buttons on the remote to select an item to be adjusted. Press or to adjust the desired setting. Press the ESC button on the remote control to exit the audio control menu.
Note: The Bass and Treble levels are only adjustable when EQ is set to "User” mode. The Loud function compensates for deficiencies in sound ranges at low levels. When the Loud function is on, LOUD is displayed in the OSD.
15
