Front Panel
1 | 2 | 3* | 4 | 5 | 6* | 7 8 | 9 | 10 | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11 12
* The unit can also be turned on by pressing these buttons.
EN
1.Q(standby/on) button
•Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.)
•Press and hold for 10 seconds to shut down the unit.
•This button lights up in red when the unit is in standby mode and turns off when the power is on.
2.Disc tray
•Place a disc after opening the disc tray.
3.A (open/close) button*
•Press to open or close the disc tray.
4.H / G (previous / next) button
•Press to skip to the previous or next title / chapter / track.
•Press to stop playback.
•Press to start or resume playback.
7.SOURCE button
•Press to switch the active source mode.
8.Infrared sensor window
•Receive signals from your remote control so that you can control the unit from a distance.
9.Display
•Refer to “Front Panel Display” on page 14.
10.VOLUME jog
•Rotate to adjust the volume.
11.SD CARD slot
•Insert an SD Memory Card and play back the contents in it.
12.MP3 LINK jack
•Phono input for connecting to the headphone jack on your portable audio player.
Note
•This unit will be turned into the standby mode automatically after 25 minutes of no action.
Setup Basic Connections Introduction
Rear Panel
1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 |
|
| LAN | HDMI OUT | AUDIO IN | FM | DIGITAL | COMPONENTVIDEO OUT | |
|
|
|
| AUX 1 AUX 2 | ANT | AUDIO IN | Pr | Y |
SPEAKERS 4 |
|
|
| 75 |
| |||
|
|
|
|
|
| COAXIAL |
| Pb |
|
|
|
|
|
|
|
| |
AC 120V |
|
|
|
|
|
|
|
|
60Hz |
|
|
|
|
|
|
|
|
SUB- FRONT | REAR | FRONT |
|
|
|
| VIDEO OUT |
|
WOOFER CENTER |
|
|
|
|
|
|
| |
Playback
1.AC power cord
•Connect to a standard AC outlet to supply power to this unit.
•Unplug this cord from the AC outlet to completely turn off the unit.
2.5.1ch Audio Out jacks (SPEAKERS (4Ω))
•Use to connect supplied 5.1ch speakers.
3.LAN terminal
•Use to connect a telecommunications equipment with LAN cable.
4.HDMI OUT jack
•Use to connect to a display with an HDMI compatible port with an HDMI cable.
5.AUDIO IN (AUX1 / AUX2) jacks
•Use to connect an other device with audio out jack with an RCA audio cable.
•Use to connect the supplied FM wire antenna.
9
7.DIGITAL AUDIO IN (COAXIAL) jack
•Use to connect an other device with a digital audio coaxial output jack with a digital audio coaxial cable.
8.COMPONENT VIDEO OUT jacks
•Use to connect a TV monitor with component video inputs with an RCA component video cable.
9.VIDEO OUT jack
•Use to connect a TV monitor, an AV receiver / amplifier or other device with an RCA video cable.
•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
•This unit does not have the RF modulator.
Others Setup Function Functions Other
EN 11