SETUPS

Connection Speed

You can set connection speed as your preference. (The default setting is “Auto”.)

1)Follow steps 1) to 4) in “Connection Test” on page 52.

2)Use [K / L] to select “Enable(Custom)”, then press [OK].

3)Use [K / L] to select “Connection Speed”, then press [OK].

4)Use [K / L] to select the desired setting, then press [OK].

“Auto”:

Set the appropriate connection speed automatically, in accordance with your network environment.

“10BASE Half”:

Set the connection speed to “10BASE Half”.

“10BASE Full”:

Set the connection speed to “10BASE Full”.

“100BASE Half”:

Set the connection speed to “100BASE Half”.

“100BASE Full”:

Set the connection speed to “100BASE Full”.

5)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Note

•Choose a connection speed in accordance with your network environment.

•The network connection may be disabled depending on the device, when the settings are changed.

BD-Live Setting

You can limit Internet access for BD-Live discs. (The default setting is “Allow”.)

1)Follow steps 1) to 4) in “Connection Test” on page 52.

2)Use [K / L] to select “Enable(Custom)”, then press [OK].

3)Use [K / L] to select “BD-Live Setting”, then press [OK].

4)Use [K / L] to select the desired setting, then press [OK].

“Allow”:

Internet access is permitted for all BD-Live contents.

“Limited Allow”:

Internet access is permitted only for BD-Live contents which have content owner certificates. Internet access without the certificates is prohibited.

“Prohibit”:

Internet access is prohibited for all BD-Live contents.

5)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Network Status

You can check the status of network settings.

1)Follow steps 1) to 4) in “Connection Test” on page 52.

2)Use [K / L] to select “Enable(Custom)”, then press [OK].

3)Use [K / L] to select “Network Status”, then press [OK].

•Network setting list will be displayed.

•MAC address of this unit will be displayed in the list.

4)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Disable

 

“Advanced

“Network

 

home A“Settings” A

Setup”

A“Others” AConnection”

A“Disable”

EN

Playback Setup Basic Connections Introduction

Deactivate all the network connection and settings.

1)Follow steps 1) to 4) in “Connection Test” on page 52.

2)Use [K / L] to select “Disable”, then press [OK].

3)Use [K / L] to select “Yes”, then press [OK].

4)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Note

•The network connection can be reactivated by setting the network connection to “Enable(Easy)” or “Enable(Custom)”.

Others Setup Function Functions Other

EN 55