Switching Active Source Mode

You can change the active source mode to the desired external audio inputs and enjoy audio from the connected device with the multi-channel surround sound capabilities.

1)Press [ (home)] to access the home menu.

2)Use [K / L] to select “External audio input”, then press [OK].

3)Use [K / L] to select the desired source mode, then press press [OK].

“Aux1”:

Set the active source mode to the AUDIO IN(AUX1).

“Aux2”:

Set the active source mode to the AUDIO IN(AUX2).

“Coaxial”:

Set the active source mode to the DIGITAL AUDIO IN (COAXIAL).

“MP3 Link”:

Set the active source mode to the MP3 LINK jack.

4)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Note

•You can also change the active source mode by pressing [SOURCE] repeatedly.

(Home Menu (Disc / SD card), “Aux1”, “Aux2”, “Coaxial”, “MP3 Link” or “FM”.)

Sleep Timer

The sleep timer enables the unit to switch to the standby mode automatically after the selected preset time.

To set the sleep timer :

Press [SLEEP] repeatedly to select the desired preset time.

“SLP OFF”:

Turns off the sleep timer.

“SLP 15”:

Set the preset turn-off time to 15 minutes.

“SLP 30”:

Set the preset turn-off time to 30 minutes.

“SLP 60”:

Set the preset turn-off time to 60 minutes.

“SLP 90”:

Set the preset turn-off time to 90 minutes.

“SLP 120”:

Set the preset turn-off time to 120 minutes.

“SLP 150”:

Set the preset turn-off time to 150 minutes.

To check or change the setting :

Press [SLEEP] once to display the remaining time.

To change the setting, press [SLEEP] repeatedly until your desired preset time is displayed.

To cancel sleep timer :

Press [SLEEP] repeatedly until “SLP OFF” is displayed.

Note

•The sleep timer will be activated even if the unit is in operation.

•Pressing [SLEEP] does not work while the settings menu is displayed.

58 EN