English
Troubleshooting (continued)
Problem (USB/HDMI) |
| Solution |
The contents of the USB flash | – | The USB flash drive format is not compatible with this |
drive cannot be read. |
| unit. |
| – | Drive is formatted with a different file system which is |
|
| not supported by this unit (e.g. NTFS). |
Slow operation of the USB | – | Large file size or high memory USB flash drive takes |
flash drive. |
| longer time to read and display on the TV. |
No audio output from HDMI – You will not hear any sound from the HDMI output if
connection.the source device is only DVI/HDCP
–It is not possible to output SACD or
–Make sure that the audio output setting is not turned off. See ‘Setup Menu Options - { Audio Setup Page - HDMI Audio }’ for details.
No video output from HDMI – HDMI connection can only be made to HDMI-
connection.equipped devices with HDCP (High Bandwidth Digital Content Protection). If you wish to connect to a DVI connector (equipped with HDCP), you will need a separate adaptor (DVI to HDMI).
–Make sure the resolution of this unit matches the device you have connected using the HDMI. See ‘Setup Menu Options - { Video Setup Page - HDMI Setup - HDMI Video }’ for details.
If the indicator on the wireless transmitter blinks continuously for more than one minute.
–The transmitter may have been swapped with another transmitter supplied with other receiver.
–Turn off all connected devices.
–Turn on the connected home theatre system.
–Press and hold the CONNECT button on the transmitter for five seconds. Release the CONNECT button.
–Turn on the wireless receiver.
52
