Option 1: Connect to HDMI jack
HDMI OUT
HDMI IN
1 Connect a HDMI cable (supplied) from the HDMI OUT on this unit to the HDMI IN jack on your TV.
Note
•The HDMI connector is only compatible with HDMI compliant TVs and
•This connection does not support video play from your iPod, a separate video connection is required.
Tips
•To optimize the video output, see chapter ‘Adjust settings’ > [ Video Setup ] > [ HDMI Setup ] for details.
•This unit is HDMI CEC compatible. It enables connected TV/device to control each other over HDMI, see chapter ‘Activate EasyLink control’ for details.
•Use a HDMI/DVI adaptor in case your TV has only a DVI connection. An extra audio connection is needed to complete this connection.
•To route the audio from your TV to this DVD Home Theater unit, connect an audio cable from the audio input on this unit to the audio output on your TV.
•This type of connections provide best picture quality.
Option 2: Connect to component video jack
COMPONENT
VIDEO OUT
1 Connect the component video cable (supplied) from the COMPONENT VIDEO OUT jack on this unit to the component video input jacks on your TV.
•If a progressive scan TV is used, you may turn on the progressive scan mode (see chapter ‘Turn on Progressive Scan’ for details.)
Tips
•The component video input jack on your TV may be labeled as Y Pb/Cb Pr/Cr or YUV.
•This type of connections provide good picture quality.
Connect English
EN 13
