Tips
•See chapter ‘Get Started - Start Ambisound setup’ for detailed information.
[ HDMI Audio ]
When you connect this unit and TV with HDMI cable, select the audio output setting for this connection.
•[ On ] – the sound is output through both your TV and this speaker system. If the audio format on the disc is not supported, it will be downmix to two- channel sound
•[ Off ] – disable audio output from your TV. The sound is only output through this speaker system.
[ Night Mode ]
Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
•[ On ] – for quiet viewing at night (DVDs only).
•[ Off ] – enjoy surround sound with a full dynamic range.
Video setup
1 Press OPTIONS.
[ General Setup ] menu is displayed.
2 Press V to select
[ Video Setup ], then press B.
3 Select an option, then press OK.
Video Setup
TV Type |
TV Display |
Picture Settings |
HDMI Setup |
Closed Caption |
Progressive |
•See the explanations of the above options in the following pages.
4 Select a setting, then press OK.
•To return to the previous menu, press BACK.
•To exit the menu, press OPTIONS.
42EN
