CONNECTIONS

HDMI Mode and Actual Output Signals

Press [HDMI] to change the resolution of the video signal being output from the HDMI OUT jack. The video resolution changes as follows every time [HDMI] is pressed. Or change the setting in the “HDMI Video Resolution” in the settings menu.

Font Panel Display HDMI Video Resolution480 ProgressivePress [HDMI]720 Progressive

Press [HDMI]

1080 Interlaced

Press [HDMI]

1080 Progressive

Press [HDMI]

Copyright protection system

To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that both the player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high- bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV receiver / amplifier) for more information.

Note

•When connected to an HDCP incompatible display device, the picture will not be displayed properly.

•The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length) may be limited by the device that is connected.

•Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). While connected to a device such as a projector, audio will not be output from the HDMI OUT jack.

•When this unit’s HDMI jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMI- DVI converter cable, the signals are output in digital RGB.

•Pressing [HDMI] does not work when HDMI cable is not connected, or when no video signal is being output from the HDMI OUT jack.

•Pressing [HDMI] does not work during the playback of a BD-video.

•When you make a selection, the TV monitor temporarily goes blank and then comes back again. If it does not, press [HDMI] repeatedly to change the resolution or press and hold [B (play)] on the front panel for 5 seconds to change the setting back to its default.

18 EN