Philips 1VMN30256A, BDP7520/F8, JpnYN-1043/F7-3 manual 49

LIST OF SETTINGS

Category

Network Connection

•Refer to pages 57-61for more information.

		Menus / Options					Description
Connection							Perform a network connection test.
Test							After you change IP address or DNS
							setting, always perform this test.
Network	Wired	Standard					If you select “Standard”, connection
Selection	Connection						test will automatically start.
		Manual	IP Address Setting		Auto(DHCP)		Set the IP address. In most cases,
					Manual	IP	you can connect to the Internet
						Address	without making any changes to
							the default setting.
						Subnet
						Mask
						Default
						Gateway
			DNS Setting		Auto(DHCP)		Set the DNS setting. In most cases,
					Manual	Primary	you can connect to the Internet
						DNS	without making any changes to
							the default setting.
						Secondary
						DNS
			Proxy Setting		Do Not Use		Set the proxy server. In most cases,
					Use	Proxy	you can connect to the Internet
						Address	without using proxy server.
						Proxy
						Port
			Connection Speed		Auto		Set the connection speed. In most
					10BASE Half		cases, you can connect to the
					10BASE Full		Internet without making any
					100BASE Half		changes to the default setting.
					100BASE Full
			BD-Live Setting		Allow		You can restrict Internet access
					Limited Allow		when BD-Live functions are used.
					Prohibit
			Network Status				You can check the current status of
							the network setting.
	Wireless	Wireless	Find wireless network		WEP/WPA Authenti-		Set up the connection to the wireless
	Connection	Router			cation		router and enter the WEP/WPA key
			Manually enter your
			SSID				required for wireless network
							connection.
			Wireless Router Status				You can check the current status of
							the wireless router setting.
		Advanced	Standard				If you select “Standard”, connection
		Settings					test will automatically start.
			Manual	IP Address Setting			Set the IP address. In most cases, you
							can connect to the Internet without
							making any changes to the default
							setting.
				DNS Setting			Set the DNS setting. In most cases, you
							can connect to the Internet without
							making any changes to the default
							setting.
				Proxy Setting			Set the proxy server. In most cases,
							you can connect to the Internet
							without using proxy server.
				BD-Live Setting			You can restrict Internet access
							when BD-Live functions are used.
				Network Status			You can check the current status of
							the network setting.
	Disable	Yes					Deactivates the network
							connection.
		No
Disclaimer							Displays the network service
							disclaimer.

EN

Others Setup Function Playback Setup Basic Connections Introduction

EN 49