SETUPS

Manual (Wired)

In following cases, select “Manual”(wired) to set each setting as necessary.

-When connection test failed with the setting of “Standard”(wired).

-When instructed by your Internet service provider to make specific settings in accordance with your network environment.

To set the network setting to “Manual”(wired), follow the following procedure.

1)Follow steps 1) to 3) in “Standard (Wired)” on page 57.

2)Use [K / L] to select “Manual”, then press [OK].

-Setting menu of “Manual”(wired) will be displayed. Set each setting as necessary.

IP Address Setting / DNS Setting

1)Use [K / L] to select “IP Address Setting”, then press [OK].

2)Use [K / L] to select the desired setting, then press [OK].

“Auto(DHCP)”

: If your router has DHCP server

 

function, select “Auto(DHCP)”.

“Manual”

: If your router does not have DHCP

 

server function, select “Manual”.

 

 

If you select “Manual”, follow the following instruction to set the IP address and DNS.

2-a) IP address setting screen will appear. Enter IP address, subnet mask and default gateway with cursor buttons and number buttons.

IP Address Setting

IP Address

Subnet Mask

Default Gateway

Clear

OK

•Enter the IP address number after checking the specifications of your router.

•If the IP address is unknown, check the IP address of other devices. (e.g. PC connected via LAN cable) and assign a different number from those of other devices.

After you enter all correctly, press [OK] to go to the DNS setting screen.

2-b) DNS setting screen will appear. Enter primary DNS and secondary DNS with cursor buttons and number buttons.

DNS Setting

Primary DNS

Secondary DNS

Clear

OK

•Enter the DNS addresses provided by your Internet provider.

•If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable) and assign the same DNS address.

2-c) After you enter all correctly, press [OK].

•Confirmation message will appear. Select “Yes” to complete the settings.

IP Address

xxx.xxx.xxx.xxx

Subnet Mask

xxx.xxx.xxx.xxx

Default Gateway

xxx.xxx.xxx.xxx

Primary DNS

xxx.xxx.xxx.xxx

Secondary DNS

xxx.xxx.xxx.xxx

 

Is Setting OK?

 

Yes

 

No

3)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Note

•The range of input numbers is between 0 and 255.

•If you enter a number larger than 255, the number will automatically be 255.

•The manually entered addresses will be saved even if you change the setting to “Auto(DHCP)”.

•When you enter a wrong number, press [Red] to cancel. (the number will be back to “0”.)

•If you want to enter 1 or 2 digit number in one cell, press [B] to move on to the next cell.

•If the entered IP address or the default gateway or primary DNS address is same as the default setting, IP address setting will be set to “Auto(DHCP)”. (The manually entered number will be saved).

•When IP address setting is set to “Manual”, the setting of DNS setting will automatically be “Manual” and when IP address setting is set to “Auto(DHCP)”, you can set either “Auto(DHCP)” or “Manual” for DNS setting.

58 EN