SETUPS
EasyLink (HDMI CEC)
home A “Settings” A “Others” A | |
|
This unit supports Philips EasyLink, which enables your TV (limited to PHILIPS brand EasyLink TV) to act in conjunction with this unit, or vice versa. Compliant TV must be connected to the HDMI OUT jack.
When “EasyLink (HDMI CEC)” setting is set to “On”, functions listed below will be available.
One Touch Play
When the operations with following buttons of the remote control of this unit are performed, the TV will automatically be turned on and switched to the appropriate input channel.
Buttons for one touch play:
-[B (play)], [S(previous)], [T(next)],
[the Number buttons], [
(home)], or [INFO 
]
-[TOP MENU], or [DISC MENU /
Standby
When you press and hold [Q(standby/on)] for 2 seconds, it turns off the power of the TV first and then turns off the power of this unit also.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit. Refer to the “Player Menu” on page 45 for available languages.
•This feature is available only when “Auto” is selected in the “Player Menu” in the settings menu.
Software Upgrade
A “Settings” A “Others” A | ||
|
|
Philips continuously tries to improve its products and we strongly recommend that you upgrade the software when upgrades are available. New software can be downloaded from our website at www.philips.com using the type number of your
Disc Upgrade
You can upgrade the software by using disc.
1)Follow step 1) in “Connection Test” on page 57.
2)Use [K / L] to select “Others”, then press [OK].
3)Use [K / L] to select “Software Upgrade”, then press [OK].
4)Use [K / L] to select “Disc Upgrade”, then press [OK].
5)Use [K / L] to select “Yes”, then press [OK].
6)Disc tray will open automatically.
•Insert the disc for software upgrade and then press [A (open/close)].
7)After completing loading disc, confirmation message will appear. Use [s / B] to select “Yes” and press [OK] to start upgrading.
• It may take a while to complete the upgrading.
8)After the disc upgrade finishes, this unit will restart and open the disc tray automatically. Remove the disc.
•Please visit www.philips.com to download the latest software version. Please read the software upgrade
•Please do not unplug the AC power cord while executing the “Disc Upgrade”.
•All settings will remain the same even if you upgrade the software version.
•The version of Netflix will also be upgraded if newer version of Netflix is available when upgrading the software.
Network Upgrade
You can upgrade the software by connecting the unit to the Internet.
1)Follow step 1) in “Connection Test” on page 57.
2)Use [K / L] to select “Others”, then press [OK].
3)Use [K / L] to select “Software Upgrade”, then press [OK].
4)Use [K / L] to select “Network Upgrade”, then press [OK].
5)Use [K / L] to select “Yes”, then press [OK].
•This unit will then start checking for the latest software version.
6)Confirmation message will appear.
Use [s / B] to select “Yes”, then press [OK].
•The unit will start downloading the latest software version.
7)When the download completes, confirmation message will appear. Press [OK].
•The unit will start upgrading the software version.
•It may take a while to complete the upgrading.
8)After upgrading finishes, this unit will restart and open the disc tray automatically.
•In order to upgrade the software via the Internet, you must connect the unit to the Internet and set up necessary settings.
•For the network connection, refer to “Connection to the Network” on page 20.
•For the network setup, refer to “Network Connection” on page 57.
•Please do not unplug the AC power cord or LAN cable while executing the “Network Upgrade”.
•All settings will remain the same even if you upgrade the software version.
•The disc tray will open automatically after upgrading finishes. This is not a malfunction.
•The version of Netflix will also be upgraded if newer version of Netflix is available when upgrading the software.