Philips LX3000 warranty Hookups - TV cont’d, Connecting to a TV with Component Video In Jacks

Connect the power cords of the DVD Receiver and TV to a power outlet.

Hookups - TV (cont’d) 11

Connecting to a TV with

Component Video In Jacks

Back of TV

(example only)

3

1

2	Red & White
	Audio Cable

3-Plug Component Video Cable

	COMPONENT	PrCr	PbCb	Y
	VIDEO OUT
	AM				P-SCAN			FR	SR
										AV
	CENTER	AUDIO OU	AUDIO IN		OFF ON	S-VIDEO	VIDEO	+	+
	LINE OUT
						OUT	OUT
					DIGITAL OUT
								-	-	3
					R			SPEAKER	4
AM/FM
	WOOPER			AUX	OPTICAL	COAXIAL
ANTENNA
	LINE OUT
						Rear of DVD Receiver

Connect the DVD Receiver’s Pr/Cr Pb/Cb Y COMPONENT

1 VIDEO OUT jacks to the matching Pr/Cr Pb/Cb Y VIDEO IN jacks on the TV. You will need a component video cable (Green-Y; Blue- Pb/Cb; Red- Pr/Cr) (not supplied). Match the cable colors to the jack colors.

To hear TV channels through the DVD Home Cinema System,

2 connect the supplied red and white audio cables to the DVD Receiver’s red/white, right/left (TV) AUDIO IN jacks and to the TV’S right/left AUDIO OUT jacks. Match the cable colors to the jack colors.

3

Turn on the TV and set it to the correct Component Video

4 In channel. Go to the lowest TV channel and change channels down until you find the Component Video In channel. (It is not channel 3 or 4 as it might be when using a VCR.) See your TV

owner’s manual for details.

Press STANDBY-ONy on the front of the DVD Receiver to

5 turn on the DVD Receiver. The red Standby light will disappear. 6 Set VIDEO OUT to PR PB Y. Details are on page 28.

TV SHAPE
TV SYSTEM
VIDEO OUT	S-VIDEO
SCR SAVER	PR PB Y/SCART
PR PB Y

Helpful Hint

•On the TV, the Component Video In jacks may be labeled YUV or Pr/Cr Pb/Cb Y and may be red, blue, and green.