Philips LX3000 warranty Hookups - TV cont’d, Connecting to a TV with an S-Video In jack

12 Hookups - TV (cont’d)

Connecting to a TV with an S-Video In jack

										S-Video Cable
				Red & White							1
				Audio Cable
Back of TV	2
(example only)			COMPONENT	PrCr	PbCb	Y
			VIDEO OUT
			AM				P-SCAN			FR	SR
			CENTER	AUDIO OU	AUDIO IN		OFF ON	S-VIDEO	VIDEO	+	+
			LINE OUT
								OUT	OUT
							DIGITAL OUT			-	-
						R				SPEAKER	4
		AM/FM
			WOOPER			AUX	OPTICAL	COAXIAL			CLASS 1
		ANTENNA
			LINE OUT								LASER PRODUCT
									Rear of DVD Receiver		3

Connect the DVD Receiver’s S-VIDEO OUT jack to the

1 S-VIDEO IN jack on your TV. You will need an S-Video cable (not supplied).

To hear TV channels through the DVD Home Cinema System,

2 connect the supplied red and white audio cables to the DVD Receiver’s red/white, right/left AUDIO IN jacks and to the TV’S right/left AUDIO OUT jacks. Match the cable colors to the jack colors.

Connect the power cords of the DVD Receiver and TV to a

3 power outlet.

Turn on the TV and set it to the correct S-Video In chan-

4 nel. Go to the lowest TV channel and change channels down until you find the S-Video In channel. (It is not channel 3 or 4 as it might be when using a VCR.) See your TV owner’s manual for details.

Press STANDBY-ONy on the front of the DVD Receiver to

5 turn on the DVD Receiver. The red Standby light will disappear.

It is not necessary to set VIDEO OUT to S-VIDEO.

6 S-VIDEO is the DVD Receiver’s default setting. However, if your picture is distorted, check the VIDEO OUT setting. Make sure it is set to S-VIDEO. Details are on page 28.