front view | A |
| |
top | back view | ||
| |||
|
|
top
B
K
L
C
D
I F E
G
H
The HeartStart Defibrillator M5066A
Philips Medical Systems
APads Cartridge Handle.
Pull the handle to turn on the
HeartStart and remove the
cartridge’s hard cover.
BReady Light. This green light tells you the readiness of the HeartStart.
Blinking: | standby mode |
| (ready for use) |
Solid: | in use |
Off: | needs attention |
| (HeartStart |
| “chirps” and |
|
COn/Off Button. Press this
green button to turn on the HeartStart. To turn off the
HeartStart, press the green button again and hold it down for one (1) second.
DInformation Button. This
blue
pressing it. It also flashes at the beginning of a patient care pause when CPR coaching is enabled.
ECaution Light. This triangular
light flashes during rhythm analysis and is on when a shock is
advised, as a reminder that no one should be touching the patient.
FShock Button. When instructed by the HeartStart to deliver a shock, press this flashing
orange button .
GInfrared (IR) Communications Port. This special lens, or “eye,” is used to transfer HeartStart data directly to or from a computer.
HSpeaker. When the device is being used, its voice instructions come from this speaker.
IBeeper. The HeartStart “chirps” through this beeper to alert you when it needs attention.
JSMART Pads Cartridge. This disposable cartridge contains self- adhesive pads with attached cable. Shown with adult pads cartridge.
KSMART Pads Cartridge Latch. Slide the latch to the right to release the pads cartridge for replacement.
LBattery. The non- rechargeable battery is inserted in a recess on the back of the HeartStart.