Philips MCD107/98 user manual Remote control does not work

Models: MCD107/98

1 28
Download 28 pages 61.95 Kb
Page 25
Image 25

‡As a power-saving feature, the system switches off automatically 15 minutes after track play reaches the end and no control is operated.

Remote control does not work

‡Before you press any function button,

ÀUVWVHOHFWWKHFRUUHFWVRXUFHZLWKWKH remote control instead of the main unit.

‡Reduce the distance between the remote control and the unit.

‡Insert the battery with its polarities (+/– signs) aligned as indicated.

‡Replace the battery.

‡Aim the remote control directly at the sensor on the front of the unit.

No disc detected

‡Insert a disc.

‡Check if the disc is inserted upside down.

‡Wait until the moisture condensation at the lens has cleared.

‡Replace or clean the disc.

‡8VHDÀQDOL]HG&'RUFRUUHFWIRUPDWGLVF

No picture

‡Check the video connection.

‡Turn on the TV to the correct Video-In channel.

Audio or subtitle languages cannot be set

‡The disc is not recorded with sound or subtitles in multiple languages.

‡The audio or subtitle language setting is prohibited on the disc.

&DQQRWGLVSOD\VRPHÀOHVLQ86%GHYLFH

‡7KHQXPEHURIIROGHUVRUÀOHVLQWKH86% device has exceeded a certain limit. This phenomenon is not a malfunction.

‡7KHIRUPDWVRIWKHVHÀOHVDUHQRW supported.

USB device not supported

‡The USB device is incompatible with the unit. Try another one.

Poor radio reception

‡Increase the distance between the unit and your TV or VCR.

‡Fully extend the FM antenna.

Timer does not work

‡Set the clock correctly.

‡Switch on the timer.

Clock/timer setting erased

‡Power has been interrupted or the power cord has been disconnected.

‡Reset the clock/timer.

26EN

Page 25
Image 25
Philips MCD107/98 user manual Remote control does not work