4Press to adjust value, then press OK.
5Press SYSTEM MENU to exit.
Audio settings
Select audio downmix
Select a suitable audio downmix when you are playing a DVD recorded in Dolby Digital format.
1Press SYSTEM MENU.
2Select [AUDIO SETUP] (audio setup) > [DOWNMIX] (downmix), then press .
3Select an option, then press OK. [LT/RT]: Select this if the unit is
connected to a Dolby Pro Logic decoder.
[STEREO] (stereo): Select this when output delivers sound from only the two front speakers.
4Press SYSTEM MENU to exit.
Select reverb mode
3D processing provides a virtual surround sound experience using just two speakers.
1Press SYSTEM MENU.
2Select [AUDIO SETUP] (audio setup) > [3D PROCESSING] (3d processing), then press .
3Select an option, then press OK. [OFF] (off),
[CONCERT] (concert) [CHURCH] (church) [PASSIVE] (passive) [WIDE] (wide)
[LIVE] (live)
4Press SYSTEM MENU to exit.
Select sampling rate
You can select the Linear Pulse Code Modulation (LPCM) output sampling rate. The higher the sampling rate, the better the sound quality.
1Press SYSTEM MENU.
2Select [AUDIO SETUP] (audio setup) > [DOWN SAMPLE] (down sample), then press .
3Select an option, then press OK.
[48K]: For discs recorded at sampling rate of 48kHz.
[96K]: For discs recorded at sampling rate of 96 kHz.
[192K]: For discs recorded at sampling rate of 192 kHz.
4Press SYSTEM MENU to exit.
Enable night mode
Night mode makes loud sound level softer so that you can watch the DVD movies at a low volume, without disturbing others.
1Press SYSTEM MENU.
2Select [AUDIO SETUP] (audio setup) > [NIGHT MODE] (night mode), then press .
3Select an option , then press OK.
[ON] (on): Enjoy quiet viewing at night.
[OFF] (off): Enjoy surround sound with its full dynamic range.
4Press SYSTEM MENU to exit.
22EN