4 Get started
Caution
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the rear of the apparatus.Write the numbers here: Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
KHDWVXQVKLQHRUÀUH1HYHUGLVFDUGEDWWHULHV LQÀUH
)RUÀUVWWLPHXVH
1Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1Open the battery compartment.
2Insert 1 CR2025 battery with correct polarity
3Close the battery compartment.
|
| Note |
|
|
|
|
|
| English |
| Before pressing any function button on the |
| ||
| UHPRWHFRQWUROÀUVWVHOHFWWKHFRUUHFWVRXUFH |
|
| |
| with the remote control instead of the main |
|
| |
| unit. |
|
| |
If you are not going to use the remote control |
|
| ||
|
| |||
| for a long time, remove the battery. |
|
| |
|
|
|
|
|
Auto install radio stations
When you connect the unit to the power VXSSO\IRUWKHÀUVWWLPHRUQRUDGLRVWDWLRQLV stored in this unit, Plug and Play is activated to store all available radio stations automatically.
1Connect the unit to the power supply.
»[AUTO INSTALL - PRESS PLAY, STOP CANCEL] ((auto install - press the
PLAY button; to cancel, press ) is displayed.
2 Press on the main unit to start installation.
»[AUTO] (auto) is displayed.
»The unit automatically store radio
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
»When all the available radio stations
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ is broadcast automatically.
Set clock
1In
»The 12 hour or 24 hour format is displayed.
2Press PROG repeatedly to select 12 hour or 24 hour format.
3Press CLOCK/DISPLAYWRFRQÀUP
»The hour digits are displayed and begin to blink.
EN 13