9 Other features
Set the alarm timer
This unit can be used as an alarm clock.The DISC, USB orTUNER is activated to play at a preset time.
1Ensure that you have set the clock correctly.
2In standby mode, press and hold TIMER.
3Press DISC, TUNER or USB to select a source.
4Press TIMERWRFRQÀUP
»The hour digits are displayed and begin to blink.
5Press 
/
to set the hour.
6Press TIMERWRFRQÀUP
»The minute digits are displayed and begin to blink.
7Press 
/ 
to set the minute.
8Press TIMERWRFRQÀUP
» The timer is set and activated.
Activate and deactivate alarm timer
1Press TIMER repeatedly to activate or deactivate timer.
»If timer is activated, the display shows 
.
»If timer is deactivated, 
disappears on the display.
Note
Alarm timer is not available in MP3 LINK mode.
If DISC/USB source is selected and the track cannot be played, tuner is activated automatically.
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1When the unit is turned on, press SLEEP repeatedly to select a set period of time (in minutes).
»When sleep timer is activated, the display shows
.
To deactivate sleep timer
1Press SLEEP repeatedly until [OFF] is displayed.
»When sleep timer is deactivated,
disappears on the display.
Listen to an external device
You can listen to an external device through this unit.
1Press MP3 Link to select the MP3 link source.
2Connect the supplied MP3 link cable to: MP3 Link jack (3.5 mm) on the unit the headphone jack on an external
device.
3Start to play the device (see the device user manual).
English
EN 23
