Radio Reception
| English |
DISPLAY/ST |
|
2 | T H E A T H R E |
Tuning to radio stations
Manual programming
1Press SOURCE on the set or TUNER on the remote repeatedly until the desired waveband (FM or MW) is displayed.
2Press and hold TUNING 22/33 and release the button.
➜ The radio automatically tunes to a station with sufficient reception.
3Repeat step 2 if necessary until you find the desired station.
●To tune to a weak station, press TUNING 22/33 briefly and repeatedly until you have found optimal reception.
1Tune to your desired station (refer to “Tuning to radio stations”).
2Press PROGRAM to activate programming. ➜ PROG flashes on the display.
3Press PRESETí/ë to allocate a number from 1 to 20 to this station.
4Press PROGRAM again to confirm the setting. ➜ PROG disappears.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Programming radio stations
You can store up to a total of 20 radio stations for each band in the memory.
Automatic programming
Tuning to preset radio stations
●Press PRESETí/ë until the desired preset station is displayed.
Press PROGRAM for more than three seconds to activate programming.
➜All available stations are programmed.
➜AUTO is displayed and available stations are programmed in order of waveband.
27
