English
Basic Operations
Switching the system on/off | Volume control |
●Press ECO
➜“HELLO” is displayed briefly.The system will switch to the last selected source.
●Press DISC, TUNER, iPod or AUX on the remote control.
➜The system will switch to the selected source.
To switch the system to standby mode
●Press ECO
➜ “ECO POWER” is displayed briefly.The interactive sound settings, last selected source and tuner presets will be retained in the player’s memory.
Switching the system to Eco Power Standby mode
●Press ECO POWER/STANDBY-ON B in the active mode.
➜ The system enters Eco power standby (the ECO POWER LED is on) or normal standby with clock display.
●The volume level (up to a maximum volume level of 12), interactive sound settings, last selected mode, source and tuner presets will be retained in the player's memory.
●If the system is normal standby with clock display, press and hold ECO POWER/STANDBY- ON Bfor 3 seconds or more to switch to Eco power standby or vice versa.
Power-saving automatic standby
As a
Turn VOLUME
➜”VOL XX” is displayed on the display panel. “XX” denotes the volume level.
To switch off the volume temporarily
●Press MUTE on the remote.
➜ Playback will continue without sound and “MUTING” flashes.
●To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Sound Control
DBB and DSC sound features cannot be activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●Press DBB on the remote to enable/disable DBB feature.
➜Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.
➜In DBB ON mode, the DBB icon will light up.
DSC (Digital Sound Control)
DSC provides a different type of preset sound equalizer setting.
●Press DSC on the remote repeatedly to select: FLAT, POPS, JAZZ, CLASSIC or ROCK.
22
