Philips MCD759D quick start Component, TV Mode, Quality, Hdmi Setup

System Menu Options

English

COMPONENT

Sets the video output according to your video connection.This setting is not required if you are using the VIDEO OUTPUT jack (yellow) to connect the DVD micro system to your TV.

➜S-VIDEO: Select this if you have connected

➜Pr/Cr Pb/Cb Y: Select this if you have connected the DVD micro system to your TV using Component video jacks.

TV MODE

Selects interlace or P-SCAN video output mode when Pr/Cr Pb/CbY is selected.

➜P-SCAN and INTERLACE.

In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player's Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, a distorted picture will appear on the TV. For proper progressive scan set up, see “Getting Started - Setting up Progressive Scan feature”.

QUALITY

This menu helps you to set the video quality.

1Press 3 4 to highlight “QUALITY”.

2Press 2 or OK to enter COLOR SETTING SETUP.

The options included in VIDEO QUALITY SETUP page are:“SHARPNESS”, “BRIGHTNESS”, “CONTRAST”, “GAMMA”, “HUE”, “SATURATION” and “LUMA DELAY”.

CONTRAST

Adjusts the contrast level. Range: -16-+16.

GAMMA

Adjusts the gamma level.

➜HIGH, MEDIUM, LOW and NONE.

HUE

Adjusts the hue level. Range: -9-+9.

SATURATION

Adjusts the saturation level. Range: -9-+9.

LUMA DELAY

Adjusts the luma delay.

➜0 T and 1 T.

HDMI SETUP

The options included in HDMI SETUP Page are: "HDMI" and "RESOLUTION".

HDMI

This option is used to enable/disable HDMI output.

➜ON: Enables HDMI output.

➜OFF: Disables HDMI output.

RESOLUTION

You can select the resolution of the picture according to your preference and the connected

HDMI TV.

The resolution options include 480p (60Hz), 720p (60Hz), 1080i (60Hz), 576p (50Hz), 720p (50Hz) and 1080i (50Hz).

Notes:

–This option is available only when the "HDMI" is set to "ON".

–If no display appears on the TV screen due to unsupported resolution, reconnect any available interlace video output to your display and re-adjust the resolution settings to 480p/576p.

SHARPNESS

Adjusts the sharpness level.

➜HIGH, MEDIUM and LOW.

BRIGHTNESS

Adjusts the brightness level. Range: -20-+20.

PREFERENCE PAGE

The options included in PREFERENCE PAGE are: “TV TYPE”, “AUDIO”, “SUBTITLE”, “DISC MENU”, “PARENTAL”, “DEFAULT” and

“PASSWORD SETUP”.

34