Program radio stations automatically
You can program a maximum of 20 preset radio stations (FM).
1 In the tuner mode, press and hold PROG for more than 2 seconds to activate automatic program mode.
»[AUTO] (auto) is displayed.
»All available stations are programmed in the order of waveband reception strength.
»The first programmed radio station is broadcast automatically.
Program radio stations manually
You can program a maximum of 20 preset radio stations (FM).
1 Tune to a radio station.
2 Press PROG to activate program mode.
»[PROG] (program) is displayed.
3 Press /
to allocate a number to this radio station, then press PROG to confirm.
4 Repeat the above steps to program other stations.
Tip
•To overwrite a programmed station, store another station in its place.
Select a preset radio station 1
Tip
•Position the antenna as far as possible from TV, VCR or other radiation source.
•For optimal reception, fully extend and adjust the position of the antenna.
FM stations with RDS
Radio Data System (RDS) is a service that sends additional broadcast information along with FM stations.
If you listen to a FM station with RDS signal, “RDS” is displayed.
Display RDS information
1 For a FM station with RDS, press RDS repeatedly to display various broadcast information.
Other features
Set the alarm timer
This unit can be used as an alarm clock. The disc/radio/USB/SD/MMC is activated to play at a preset time.
1 Ensure that you have set the clock correctly.
2 Press 
to switch to standby mode.
3 Press TIMER.
»A prompt to select the source is displayed.
4 Press CD, or TUNER or USB/SD to select a source.
5 Press TIMER to confirm.
»The clock digits are displayed and begin to blink.
6 Press 
/ 
to set the hour.
7 Press TIMER to confirm.
8 Press 
/ 
to set the minute.
»The timer is set and activated.
To deactivate or
1 Press TIMER ON/OFF repeatedly to activate or deactivate timer.
»If timer is activated, the display shows
.
»If timer is deactivated, 
disappears on the display.
E n g l i s h
EN 13
