Philips MCM330 Get started, Placement, Prepare the remote control, Connect power, Mount on a wall

qMUTE

•Mute volume.

rVOL +/-

•Adjust volume.

sDISPLAY

•Select display information.

tTIMER ON/OFF

•Turn on or off alarm timer.

uTIMER

•Set the alarm timer.

vSLEEP

•Set the sleep timer.

3 Get started

Caution

•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Placement

You can place the unit on a flat surface or mount the unit on a wall.

Mount on a wall

To wall mount the unit, see the included separate sheet of wall mounting instructions.

Prepare the remote control

Caution	n g l i s h
	E

•Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

For first-time use:

1 Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

1 Open the battery compartment.

2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated.

3 Close the battery compartment.

Note

•Before pressing any function button on the remote control, first select the correct source with the remote control instead of the main unit.

•If you are not going to use the remote control for a long time, remove the battery.

Connect power

Caution

•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the unit.

•Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord.

•Before connecting the AC adaptor, ensure you have completed all other connections.

EN 9