CONTROLS
English | ² SLEEP | |
– to switch the system to standby mode | ||
| ||
| at a selected time period. |
°BALANCE L/R
–to balance the sound level of the Front Left and Right speakers.
¤MUTE
–to switch off the sound temporarily.
³ TIMER
–to switch on or off timer.
¥B
–to switch the system to standby mode.
OPERATING THE SYSTEM
CD CHANGER |
|
|
|
|
|
|
|
|
|
FRONT BACK |
|
|
|
|
|
|
| NEWS | DIM |
|
|
|
|
|
|
|
| T.A. | SLEEP |
REC HSD | TRACK | PRESET REPEAT | AM LW | MW FM | STEREO | PROGRAM | TIMER SHUFFLE |
|
|
INCREDIBLE |
|
|
|
|
|
|
|
|
|
SURROUND |
|
|
|
|
|
|
|
|
|
LOUDNESS |
|
|
|
|
|
|
|
|
|
FLAT |
|
|
|
|
|
|
|
|
|
SOUND | 60Hz | 250Hz | 500Hz | 1KHz | 2KHz | 4KHz | 8KHz | VOLUME | |
3 CDC |
|
|
▲ | PRESET ▲ | A•B |
|
|
| DIGITAL CONTROL |
|
TUNER | SEARCH/TUNE | PLAY / | DIM | PROG/A.REV REC/CD SYN |
| PRESET | STOP |
| FLAT |
TAPE | BASS |
|
| TREBLE |
|
| INCREDIBLE | LOUDNESS |
|
|
| SURROUND |
| |
CDR/AUX |
|
|
|
|
CLOCK/
TIMER
DUBBING
NORMAL•FAST
Notes for remote control:
–First select the source you wish to control by pressing one of the source select keys on the remote control (e.g. CD, TUNER, TAPE 1/2 or AUX).
–Then select the desired function (ƒ, ’, ‘, etc.).
10
Important:
Before you operate the system, complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that shows the various features offered by the system. When the system is switched on for the first time, the demonstration mode will start automatically.
Notes:
–During the demonstration, if you press any source (or
–When the system is switched to standby mode, the demonstration will resume 5 seconds later.
To stop the demonstration mode
•Press and hold STOP (on the system only) for 5 seconds when the system is in demonstration mode.
ªThe demonstration will stop.
ª"DEMO OFF" is displayed.
ªThe system will switch to standby mode.
Note:
–Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again.
To start the demonstration mode
•Press and hold STOP (on the system only) for 5 seconds when the system is in standby mode.
ª The demonstration will begin.
