CLOCK
English
3 CDC
TUNER
TAPE
CDR/AUX
CD CHANGER |
|
|
|
|
|
|
|
|
|
FRONT BACK |
|
|
|
|
|
|
| NEWS | DIM |
|
|
|
|
|
|
|
| T.A. | SLEEP |
REC HSD | TRACK | PRESET REPEAT | AM LW | MW FM | STEREO | PROGRAM | TIMER SHUFFLE |
|
|
INCREDIBLE |
|
|
|
|
|
|
|
|
|
SURROUND |
|
|
|
|
|
|
|
|
|
LOUDNESS |
|
|
|
|
|
|
|
|
|
FLAT |
|
|
|
|
|
|
|
|
|
SOUND | 60Hz | 250Hz | 500Hz | 1KHz | 2KHz | 4KHz | 8KHz | VOLUME | |
▲ | PRESET ▲ | A•B |
|
|
|
|
| DIGITAL CONTROL |
|
SEARCH/TUNE | PLAY / | DIM | PROG/A.REV REC/CD SYN | |
| PRESET | STOP |
| FLAT |
| BASS |
|
| TREBLE |
|
| INCREDIBLE | LOUDNESS |
|
|
| SURROUND |
| |
CLOCK/
TIMER
DUBBING
NORMAL•FAST
Notes:
–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.
–When a power interruption occurs, the clock setting is erased.
–To set the time with RDS clock, see "Receiving RDS Radio Station" under TUNER section.
TIMER
Setting the Timer
•The system can switch on to CD, TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up.
•Before setting the timer, make sure the clock is set correctly.
•The timer will always be switched on once it is set.
•The volume of the timer will start to increase from the minimum level until the volume level before the set is switched to standby mode.
Viewing the Clock
You can view the clock (if it is set) while the system is in standby mode or any source mode. It will be displayed for about 7 seconds.
•Press CLOCK/TIMER briefly (on the system only).
ª“10:38” (the current time) will be displayed.
ª
22
Setting the Clock
The clock is set in
“00:00“ or “23:59“. Before setting the clock, you must be in the View Clock mode.
1Press CLOCK/TIMER to select clock mode.
ª“00:00” or the current time starts flashing.
2Press S or T to set the hour (PRESET mode OFF).
3Press S or T to set the minute (PRESET mode ON).
4Press CLOCK/TIMER again to store the setting.
ªThe clock starts.
•To exit without storing the setting, press STOP on the system.
1Press and hold CLOCK/TIMER for more than 2 seconds to select timer mode.
ª“00:00” or the last set timer starts flashing. The TIMER flag flashes.
ªThe last selected source is lit while other available sources are flashing.
2Press 3 CDC, TUNER or TAPE to select the desired source.
•Before selecting CD or TAPE, make sure a CD or tape is loaded in the CD tray or tape deck 2.
3Press S or T to set the hour for the timer to start (PRESET mode OFF).
4Press S or T to set the minute for the timer to start (PRESET mode ON).
5Press CLOCK/TIMER to store the start time.
ªThe timer is now set.
ªThe TIMER flag remains on the display.
