Net 1Card IB 2/15/00 12:18 PM Page 20

COMMERCIAL SETTING

FRONT KEYPAD allows you to enable or disable the buttons on the front of the TV. The default setting is “ON.” “CABLE” allows you to select between the cable

“YES” or “NO.” The default is “YES.”

BEGIN

If not already in the “COMMERCIAL SET- TINGS” menu, press the A button on the remote con- trol. Then press the ▼ button to highlight “FRONT KEYPAD.”

Press the – (◀) or + (♣) button to select “OFF” or “ON.”

When finished, press the ▼ button to highlight “CABLE.” Press the – (◀) or + (♣) button to select “YES” or “NO.” Cable should be set to the same setting as under the TV's “SETUP MENU.” For example, if the “SETUP MENU is set to “CABLE YES,” then the setup here should be “CABLE YES.” See page 33 for TV setup details. (Note: the cable setting of a Transmitter TV will override the setting of a Receiver TV whenever a channel is tuned.)

When finished, press the ▼ button to highlight “EXIT.” Then press the “M” button. Or you can exit by simply pressing the RECALL button when you’re done.

 

 

 

 

 

 

 

 

COMMERCIAL SETTINGS

 

 

 

MODE

COMMERCIAL

 

 

 

CONTROL MODE TRANSMIT

 

 

 

FRONT KEYPAD

 

ON

 

 

 

CABLE

 

YES

 

 

 

EXIT MENU

 

 

 

 

 

– FOR OFF / + FOR ON

 

 

 

 

 

 

 

 

 

 

 

COMMERCIAL SETTINGS

 

 

 

MODE

 

COMMERCIAL

 

 

 

CONTROL MODE

TRANSMIT

 

 

 

FRONT KEYPAD

ON

 

 

 

CABLE

 

 

YES

 

 

 

EXIT MENU

 

– FOR NO / + FOR YES

20

RECEIVER CONTROL

Once you have completed your general selections under the Commercial Settings menu, you must

make specific selections. These specifics depend on whether you set up the TV to “RECEIVE,” “TRANS- MIT,” or “FACTORY.”Since “RECEIVE” is the default setting and since almost all the TVs in the Net1Card net- work with be “RECEIVErs,”those specific selections are explained first.

BEGIN

If not already in the “RECEIVER CONTROL” menu, press the D button on the remote control. “RCVR GROUP IDS” should be highlighted. Receiver Group IDs allows you to group TVs. That way, you can send a message only to a group or groups of TVs and not all the TVs in the Net1Card network.

Press the Number buttons 1 - 8 to select which group or groups you want this particular TV to belong to. Each Receiver TV in the Net1Card network can belong to up to eight groups. To remove a TV from a group, simply press that Number button again.

For example, if you place a TV in groups 1, 4, 5, and 8, press the 1, 4, 5, and 8 Number buttons. If you should then want to remove the TV from the group 5, press the 5 button again. The TV is now is groups 1, 4, and 8 (as pictured below).

When finished, press the ▼ button to highlight “RCVR SET ID.”

RECEIVER CONTROL

RCVR GROUP IDS 1- - 4 - - - 8

RCVR SET ID

0

EXIT MENU

 

DIGITS TOGGLE GROUP IDS

21

Page 10 Page 12
Page 11
Image 11
Philips Network Adaper Commercial Setting, Receiver Control, When finished, press the button to highlight Rcvr SET ID
Page 10 Page 12

Network Adaper specifications

The Philips Network Adapter is a state-of-the-art device designed to enhance the way users connect and interact with their digital environments. With the increasing demand for seamless connectivity in the home and office, Philips has developed this versatile adapter to ensure reliable performance and superior user experience.

One of the key features of the Philips Network Adapter is its ability to support a wide range of devices. Whether you are looking to connect smart TVs, streaming devices, gaming consoles, or other Internet-enabled gadgets, this adapter provides the necessary interface for swift and easy connectivity. It eliminates the limitations often faced with traditional wired connections, offering flexibility and convenience.

The Philips Network Adapter employs advanced wireless technologies, including dual-band Wi-Fi support. This allows for simultaneous connections on both the 2.4 GHz and 5 GHz bands, ensuring that users can enjoy smoother streaming, faster downloads, and reduced latency in online gaming. The result is a seamless and uninterrupted experience, ideal for households with multiple devices in use.

Another notable aspect of the Philips Network Adapter is its compatibility with various networking protocols, including IPv4 and IPv6. This future-proofing feature ensures that the adapter can easily integrate into modern network infrastructures, allowing users to take advantage of the latest advances in internet technology without needing frequent upgrades.

Security is a paramount consideration for any network device, and the Philips Network Adapter prioritizes this with robust encryption protocols such as WPA2. This ensures that users can connect confidently, knowing their data and privacy are protected from unauthorized access.

The compact and sleek design of the Philips Network Adapter also cannot go unnoticed. It fits easily into home or office environments without occupying excessive space or becoming an eyesore. Whether placed on a shelf or mounted on a wall, it complements any decor.

In conclusion, the Philips Network Adapter stands out as a powerful solution for anyone looking to enhance their connectivity. With its impressive features, advanced technologies, and commitment to security and design, it offers a comprehensive solution for today’s digital demands. Whether for leisure or work, this network adapter is a reliable tool that ensures users stay connected efficiently and effectively.
Top Page Image Contents